230601. Area Hefei Anhui China 
    info@world-magnet.com
    +86-13855156049
稿定设计导出-20190605-084546
稿定设计导出-20190604-152850
2
Factory & Produce
There are 10000 Square meter factory. And two hundrands workers and technical staff.
Factory & Facility
We have advanced equipment, short processing cycle, fast delivery, accept custom, just need to offer the request to our email.
Products & Samples
We are professional manufacturer of Neodymium Magnet with ten years experience. Our Buckyballs Toys have good market. Sample available.
Storage & Products
Have the big Warehouse, 50% products have in stock, if you custom size,  our production time about 15 days.
Express & Transportation 
We accpet air express, also can deliver by sea. According to the customer's requirements.
Team
Our team is experienced and professional. There are 100 in the term. We can provide the service for you on 24 hours.
Featured Products
You are here: Home » News » Magnet Industry News » Reance I™ - Injection Molded Neodymium Iron Boron Magnet

Reance I™ - Injection Molded Neodymium Iron Boron Magnet

Views:0     Author:Site Editor     Publish Time: 2017-02-22      Origin:Site

Reance I™ - Injection Molded Neodymium Iron Boron Magnet

 

SDS Sheets  

 

Reance I™ – Injection Molded Neodymium Iron Boron Magnet

Reance I™ is Electrodyne’s trade name for its line of rigid injection molded neodymium iron boron magnet products.

 

Reance I™ magnets are injection molded utilizing nylon 6 or 12 as the binder, and are available up to 4.5 MGOe. Reance I™ permanent magnets can be molded to intricate shapes, allowing the engineer to design a magnetic circuit in ways not possible with traditional magnet types.

 

Reance I™ production techniques also allow for very tight dimensional tolerances for complete product optimization.

 

As with all Electrodyne products, our technical staff is available to discuss the production of specialized compounds and magnetizing fixtures to meet the customer’s requirements.

 

Reance I Typical Demagnetization Curve

 

I-33

 

Maximum Energy Product, Bd Hd max (gauss-oersteds)

4.0 x 106

 

Residual Induction Br (gauss)

 

4350

 

Coercive Force Hc (oersteds)

 

3700

 

Intrinsic Coercive Force Hci (oersteds)

 

9000

 

Temperature Coefficient of Magnetization (%/C)

 

-0.13

 

Temperature Coefficient of Coercivity (%/C)


  • [Magnet Industry News] What is Magnetic tile

    First, the definition of magnetic tile: magnetic tile talking about here is a permanent magnet in a permanent magnet motor is mainly used in the tile-shaped magnets.Second, the magnetic tile classification: magnetic tile depending on their raw materials are mainly three categories:1, ferrite magneti

  • [Magnet Industry News] Plastalloy Chip Collector Flexible Ferrite Magnet

    Plastalloy Chip Collector Flexible Ferrite MagnetPlastalloy™ Flexible Ferrite Magnetic Chip Collector Painted Plastalloy Flexible Ferrite MagnetPainted Plastalloy™ Flexible Ferrite Magnet Special Cutting TechniquesSpecial Cutting Tec

  • [Magnet Industry News] Introduction of Ferrite Magnet

    The ferrite is made of iron oxide and other ingredients. Generally can be divided into permanent ferrite, soft ferrite and rotating ferrite three.Permanent magnet ferrite, also known as ferrite magnet, is what we usually see the black small magnet. Its composition of raw materials are mainly iron ox

  • [Magnet Industry News] What is rubber magnet

    Rubber Magnet is a kind of ferrite insulator series, which is made of flexible, elastic and distorted by the process of combining ferrite magnetic powder with synthetic rubber, extruded, calendered and injection molding.

Super Magnet

More »
Address:No.7598 Ziyun Road,,Economic-Technological Development Area,Hefei,Anhui,China 230601
Economic-Technological Development Area,Hefei,Anhui,China 230601  
Post Code: 230601
Viber:86-13855156049
Tel: 86-551-63409690
Fax: 86-551-64859786 
E-mail: info@world-magnet.com
 
33

Contact Us
Copyright © 2002 Hefei Super Electronics Co., Ltd All rights reserved. Site Map